GUIDE TO PERSONAL PROTECTIVE EQUIPMENT (PPE)

DISPOSABLE LEVEL 2 ISOLATION GOWNS

The Level 2 Disposable Isolation Gown meets ANSI/AAMI PB70-2012 requirements and is water resistant. The gowns are made of 70 percent polypropylene and 30 percent polyethylene, are 47 inches long. They’re split-type style with a tie in back and cuffed sleeves. Available in packs of 10.

NITRILE GLOVES

These nitrile gloves are made of 100 percent nitrile material, which is free of the allergens found in standard latex gloves. They are engineered to give users high performance by offering both maximum protection and unsurpassed tactile sensitivity. This careful attention to detail includes textured fingertips to help with fine motor skills, beaded cuffs for quick and easy donning and a thickened palm for durability and reliability.

AVAILABLE IN: BLACK/SAND/BLUE /// SMALL – EXTRA LARGE

KN95 MASKS

Tested by NIOSH’s National Personal Protective Technology Laboratory (NNPTL), the KN95 masks exceed NIOSH’s N95 standard of 95 percent for filtration purposes during in-house testing with a maximum filter efficiency of 99.69 percent and a minimum of 99.48 percent. These masks are included in the FDA’s Appendix A—Authorized Imported, Non-NIOSH Approved Respirators Manufactured in China.

KN95 MASKS

These KN95 masks have an ear loop design and were tested by NIOSH’s National Personal Protective Technology Laboratory (NNPTL) on 29 May and were found to exceed NIOSH’s N95 standard of 95 percent for filtration purposes during in-house testing with a maximum filter efficiency of 99.28 percent and a minimum of 98.96 percent.

3-PLY SURGICAL MASK

The Level 3 FDA-approved, single-use ear loop face mask is splash resistant and has 99 percent bacterial filtrations efficiency. Meeting standard specification for performance of materials used in medical face masks, this mask is ASTM F2100-19 approved and has three layers of filtrations. Available in Mediterranean blue and comes in packs of 50.

NON-CONTACT INFRARED FOREHEAD THERMOMETER

The YT-1 Non-Contact Infrared Forehead Thermometer features an infrared sensor that quickly tells if you have a fever and does not require contact with skin, reducing the risk of cross-contamination and enhancing patient comfort. This fever scanner is widely used during an infectious disease pandemic.

NON-CONTACT INFRARED FOREHEAD THERMOMETER

Non-contact Infrared Thermometer measures body temperature accurately, quickly and without physical contact with patient. The backlit LCD screen provides an easy to read display. Single trigger activation allows for rapid measurements in any setting. Simple battery replacement and automatic shutdown assure a long service life.